Learn step by step how to close breaks and fissures in the walls

by

Procedure

  1. Place the tarp around the place where you are going to make the repair. This prevents the product from getting dirty and then having to spend hours cleaning the floor.
  2. To take care of your health, put on the protective mask and gloves.
  3. We grab the spatula and proceed (very carefully) to eliminate the small pieces that are loose inside the break.
  4. Then with the brush, we make sure to remove all the dust that remains. This helps the product adhere more easily.
  5. It is important that the place is very dry.
  6. We proceed to put the putty little by little until the inside of the break is well filled.
  7. With the smooth trowel, we proceed to pass all the putty over the break, leaving it very neat.
  8. Let it dry for 24 to 48 hours.
  9. After time, we use sandpaper to finish eliminating imperfections.
  10. Finally, you can now paint it with the color you have on the wall.

With just these simple steps, you have already solved this problem. If you see that it doesn’t fit you very well, you can continue practicing or call a professional.

Leave a Comment